Next Post Coming Soon…▶

In my Keltec KS7 review, I mentioned that I wish someone would make an M-LOK side saddle I could attach to the shotgun. There isn’t a lot of room on the gun for accessories. It’s only 26.1 inches long, and there simply isn’t enough real estate to place even a Velcro side saddle in an ergonomic fashion.

That weird carry handle, however, offers a few M-LOK slots for various accessories. In my mind, an M-LOK side saddle placed on the carry handle would be perfect. 

M-LOK Side Saddle How-To

Placing an M-LOK side saddle anywhere else would get in the way of the pump action or would be placed in such a way as to make it difficult to reach. The carry handle, though, offers a non-moving mounting base for adding accessories. Since I couldn’t find one in the aftermarket, I made one for about $20. Here is what you’ll need. 

The ATI Shotshell holder looks to be designed to fit an ATI stock. It holds five 12 gauge shells and runs a little under $20. This shotshell holder has six holes that allow it to attach to the ATI stock. These served as perfect pilot holes for my M-LOK bolts. 

It didn’t seat deep enough (Travis Pike for TTAG)

I used M-LOK bolts from a SIG TREAD kit but you can get them from lots of sellers. These screws fit perfectly into the pilot holes in the ATI shotshell holder. The only problem was the heads of the screws were too big and didn’t fit deeply enough to accommodate the shells. 

To remedy this, I used a Dremel tool to shave off some material around the holes. You could use a drill or a hand file to do the same. Mine was quick and rough, but it worked. The material is soft plastic, so it cuts easily. 

I didn’t widen the holes, but I widened the area around them to allow the wider screw head to sit deeply enough to allow shells to fully insert into the side saddle. 

Now it fits perfectly (Travis Pike for TTAG)

I trimmed the top three holes and ensured my shells fit without a fight. I didn’t want the heads of the bolts to press into the shells and deform them. Once the shells squeezed in and out without difficulty, I found the deeper holes to be satisfactory. 

Once that was done, I had my M-LOK sidesaddle and attached it with ease to my KS7’s carry handle. 

Professional Grade?

Admittedly, the ATI Shotshell holder isn’t a Mesa Tactical or Aridus Industries option. It’s cheap and would not be my first choice for a self-defense firearm. However, for this experiment, it works and works well. Luckily, it’s not a portion of the firearm necessary for operation. 

Its a good fit (Travis Pike for TTAG)

In shooting the KS7 with my newly equipped M-LOK side saddle, I didn’t find any immediate issues. Buck and bird were fired from the gun, and the shells in the holder never slipped or moved around under recoil. Time will tell, but for less than $20, free two-day shipping, and a micro-donation with every purchase to GOA, I’m satisfied. 

Thinking Out Loud

The KS7 has enough M-LOK slots to mount a side saddle on either side should you desire to. I have a cheap Crimson Trace light mounted on mine. On the KS7 there are some slots behind the pump. They offer you limited room, but if you were to cut the ATI Shotshell holder into two sections, they could be mounted in these locations. I haven’t experimented with either idea, but I can see the possibilities. 

Boom, five rounds on tap (Travis Pike for TTAG)

I might try to hack up a better quality shell holder and convert it into a more durable M-LOK side saddle, but I have to decide if I want to lay out sixty bucks on something I’m going to hack up that might or might not work. Or Mesa could just make an M-LOK side saddle for me. 

 

Next Post Coming Soon…▶



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *